Solution to moisture absorption problem of Chinese medicine extract powder during capsule filling

Sep 19, 2019

Leave a message

The ideas for solving this problem are listed as follows:

1. Optimize the extraction process of traditional Chinese medicine, reduce the amount of powder collected on the premise of not affecting the quality of the product, and allow larger adjustment space for the preparation process.

2. Control the preparation environment.  At present, GMP factory buildings generally use central air conditioning system, which has very weak control over specific rooms. It can be considered to install relatively independent air conditioning system in capsule mixing and filling rooms to strictly control temperature and humidity.

3. Treatment of powder.  Granulation is considered to reduce the surface area of the material and increase the fluidity.  At the same time, lubricant is added to reduce the phenomenon of sticking and punching.

4. Control of production management.  When filling the traditional Chinese medicine capsule, it may be required to mix the powder and filling at the same time or mix a small part and fill a small part, so that the shorter the exposure time of the powder in the air, the better.

The key to solve the problem of moisture absorption of traditional Chinese medicine powder is to select auxiliary materials or adopt particle coating technology to prevent moisture, because even if moisture absorption does not occur in the production process, moisture absorption and agglomeration will still occur not long after it is put on the market.  My practical experience is to add 10%-15% aluminum hydroxide to the extract powder, if not, use 5-6% acrylic resin to granulate, and then coat the granules with acrylic resin to solve the problem 100%.


Send Inquiry