Vegetable Enteric Empty Capsules can only be dissolved and absorbed in the human small intestine. A special medicinal polymer material is added to the capsule shell or specially treated to make it not dissolve in the gastric juice, and only dissolves in the intestinal juice.
Product introduction
Vegetable Enteric Empty Capsules will not dissolve in the stomach, or in the water or even in the boiling water. They will dissolve in the intestinal tract when they encounter an alkaline liquid, due to the stomach acid is acidic, so the capsules are not dissolved in the stomach. In addition, they also known as extended-release capsules, are uniquely designed to resist the acidic environment of the human stomach during the digestive process until they reach the next step of digestion.Vegetable Enteric Empty Capsules are viable alternative to achieve enteric protection and delayed release without functional (enteric) coating. They pass through the stomach intact, and then dissolve approximately one to two hours after ingestion when they reach the alkaline environment of the small intestine.
Product specifications
| Size | Size Specification | Weight (mg) | moisture | |||||||
| Cap thickness | Body thickness |
Dome thickness (mm) |
Cap Length (mm) | Body Length (mm) | Lock Length (mm) | External Diameter (mm) | ||||
| (mm) | (mm) | Cap | Body | |||||||
| #000 | 0.125±0.020 | 0.120±0.020 | ≥0.15 | 13.30±0.40 | 22.05±0.40 | 25.7±0.50 | 9.80-9.90 | 9.44-9.54 | 172±8.0 | 4~8% |
| #00el | 0.115±0.020 | 0.110±0.020 | ≥0.12 | 13.10±0.40 | 22.20±0.40 | 25.3±0.50 | 8.50~8.60 | 8.15~8.25 | 140±8.0 | |
| #00 | 0.115±0.020 | 0.110±0.020 | ≥0.12 | 11.80±0.40 | 20.05±0.40 | 23.4±0.50 | 8.50-8.60 | 8.15-8.25 | 123±8.0 | |
| #0 | 0.110±0.020 | 0.105±0.020 | ≥0.12 | 11.00±0.40 | 18.50±0.40 | 21.7±0.50 | 7.61-7.71 | 7.30-7.40 | 97±7.0 | |
| #1 | 0.105±0.020 | 0.100±0.020 | ≥0.12 | 9.90±0.40 | 16.50±0.40 | 19.3±0.50 | 6.90-7.00 | 6.61-6.69 | 77±6.0 | |
| #2 | 0.095±0.020 | 0.095±0.020 | ≥0.12 | 9.00±0.40 | 15.40±0.40 | 17.8±0.50 | 6.32-6.40 | 6.05-6.13 | 63±5.0 | |
| #3 | 0.090±0.020 | 0.090±0.020 | ≥0.12 | 8.10±0.40 | 13.60±0.40 | 15.7±0.50 | 5.79-5.87 | 5.53-5.61 | 47±4.0 | |
| #4 | 0.090±0.020 | 0.085±0.020 | ≥0.12 | 7.20±0.40 | 12.20±0.40 | 14.2±0.50 | 5.28-5.36 | 5.00-5.08 | 38±3.0 | |
Recommended storage conditions: 15-25 ℃, 35-65% relative humidity.
Physicochemical and microbial index
|
TEST ITEM |
|
SPECIFICATIONS |
|
Disintegration time |
|
≤15min |
|
Loss on drying |
|
≤8.5% |
|
Ignition residue |
Transparent |
≤3.0% |
|
|
Opaque |
≤6.0% |
|
Heavy metal |
|
≤0.0010%(10ppm) |
|
Arsenic |
|
≤0.0002%(2ppm) |
|
Microbiology |
Total bacteria count |
≤1000 cfu/g |
|
|
Total yeast and mold count |
≤100 cfu/g |
|
|
Escherichia coli |
Absent in 1g |
|
|
Salmonella |
Absent in 10g |
Product details
-
Dimple is designed to gently engage with indented ring of the body during pre-locked status.
-
Smooth cutting edge can affect the capsule filling performance.
-
The tapered rim design on the body allows for telescope-free encapsulation, especially on high speed capsule filling machines.
-
Hemispherical end also needs to bear closing pressure during locking motion.
-
End of cap is the main part bearing closing pressure during locking motion. Its thickness must bear closing force of the filling machine to prevent dent.
-
Locking rings are designed to be close-fitting during locked status and to prevent separation or content leakage.
-
Air vents are designed to release the compressed air inside capsules occurred during filling process.
Body thickness must be within specifications for enabling to perform smoothly during filling process and to have a close fit between the walls of cap and body.
Production process
Quality Assurance
Control of design and development: With scientific basis, the research and development process is rigorous to eliminate adverse effects.
Control of raw material: The company procures raw materials from high quality suppliers and each batch of them is strictly inspected to ensure stable and safe quality.
Control of manufacturing process: All manufacturing processes are strictly controlled in accordance with GMP requirements to ensure that the process can meet the requirements continuously and stably.
Control of Finished product: Each batch is inspected to ensure that the quality of the product meets the requirements.
FAQ
1. Who are we?
We are based in Shandong, China, start from 2014,sell to Western Europe(50.00%),North America(40.00%),Domestic
market(5.00%),Eastern Asia(5.00%). There are total about 301-500 people in our office.
2. How can we guarantee quality?
Always a pre-production sample before mass production;
Always final Inspection before shipment;
3.What can you buy from us?
HPMC capsule,vegetable capsule,empty capsule,capsule shell,gelatin capsule
Healsee is the world's first and only vertically integrated manufacturer of HPMC capsules.
5. What services can we provide?
Accepted Delivery Terms: FOB,CFR,CIF,EXW,DDP,Express Delivery;
Accepted Payment Currency:USD,EUR,CNY;
Accepted Payment Type: T/T,L/C;
Hot Tags: vegetable enteric empty capsules, China, manufacturers, suppliers, factory, buy, for sale, encapsulation, plant based capsules, custom made capsules, capsule wholesalers, sealed capsules, mineral capsules
